Starch Fiber Dewatering Pressure Sieve Bend Screen

$79.90

Brand: Bluslot®
Type: Wedge Wire Sieve Bend Screen
Material: SS304, 316, 316l, 2205,32750, 904, 904L, Hastelloy
Slot size:  20 microns or more
Angle: 60°, 90°, 120°
Application: Corn deep processing engineering, corn slurry and slag separation, starch fiber dewatering, and washing

Why BLU-HXS-03 Series Sieve Bend Screen?

Pressure Sieve Bend screen (DSM Screen) is mainly used in corn deep processing engineering. It is special equipment for corn slurry and slag separation, starch fiber dehydration, and washing. It is the core equipment to ensure the quality and efficiency of corn deep processing products.

The ordinary pressure curved screen is a piece with a length of 1595mm. In the process of actual production and use, because the upper and lower parts of the screen are impacted by materials, the screen surface wears quickly and is very easy to break through the screen surface.

In the process of starch production, the requirements for the screening effect are very strict, so the screen surface can not be used after being worn and broken down. It is necessary to scrap and replace with a new screen.

Although the upper and lower parts are easy to break down, the middle part is always intact. However, the screen is a whole, so it is necessary to change and adjust all the screen pieces, which causes great waste to users and relatively increases the cost (all the screen pieces are made of stainless steel 316, and the product price is high). This problem has plagued the majority of screen users for a long time.

BLU-HXS-03 series products are designed to provide a combined pressure sieve bend screen, which can save production cost, increase production efficiency, reduce labor intensity, improve product quality, increase the service life of the screen, and facilitate installation and transportation.

Structural Features Of BLU-HXS-03 Series Sieve Bend Screen

  • The utility model is composed of a pressure sieve bend screen sheet, a sidelining strip, and a middle lining strip, which is characterized in that the pressure sieve bend screen sheet is divided into 3 or 4 pieces, both sides of each pressure curved screen sheet are fixed on the lining strip, and the lining strips of two adjacent pressure sieve bend screen sheets are connected with connectors.
  • The pressure screen piece is decomposed into a combined structure of multiple pieces, so only the parts easy to break down at both ends can be replaced, and the intact middle part can continue to be used. The manufacturer can save more than 50% of the cost and reduce the waste.
  • Wedge wire screen with continuous slotting structure is easy to clean, not easy to block, and long service life.

Reviews

There are no reviews yet.

Be the first to review “Starch Fiber Dewatering Pressure Sieve Bend Screen”

Your email address will not be published. Required fields are marked *