Resin Trap Filter For Water System

$35.90

Brand: Bluslot®
Type: Wedge Wire Resin Trap & Strainer Filter
Material: SS304, 316, 316l, 2205,32750, 904, 904L, Hastelloy
Slot size: 10 microns or more
Connection method: threaded fittings, couplings, or flanges
Application: Water System

Why use BLU-SZB-10 series Resin Trap Filter?

A device is used to capture resin particles carried out of an ion exchanger with water. When using resin for online water treatment, when the quality of the resin is poor (insufficient strength), water pressure disturbance is large (especially high-pressure disturbance), vertical cylinder wall is damaged, etc., the resin will enter the whole water system.

It will affect the normal operation of other equipment of the water system, so it is necessary to install a vertical resin trap.

The resin trap is mainly to install a filter screen with a smaller aperture than the resin on the water system pipeline near the outlet of equipment equipped with a resin such as an ion exchanger. When the resin passes through, it can be intercepted and captured by the filter screen.

The existing resin trap is very inconvenient to clean the filtered resin, so it is usually cleaned only when it is accumulated to a certain extent. However, if it is not cleaned for a long time, the filtered resin will be re-filtered and the filtering effect will be affected.

The BLU-SZB-10 series provides a resin trap filter for a water system and overcomes the above defects.

Installation of BLU-SZB-10 series Resin Trap Filter

The resin trap for the water system comprises a wedge wire screen filter cartridge and a filter element placed in the filter cartridge, and the filter cartridge is connected with a three-way valve.

The filter cartridge is provided with a locking door, a collection box is arranged in the blocking door, a trapezoidal hole is arranged at the bottom of the collection box, a through-hole is arranged at the upper part, an anti-reflux elbow with one end connected with the trapezoidal hole is arranged in the collection box, and the other end of the anti-reflux elbow is hinged with a blocking cover.

The filter element comprises a baffle, the center of the baffle is provided with a rotating shaft, the inner wall of the filter barrel is provided with a protrusion, the baffle is fixedly placed on the protrusion, the baffle includes a fixed baffle and a movable baffle placed above the fixed baffle, and the two baffles are provided with corresponding filter holes with the same size and position.

Advantage of BLU-SZB-10 series Resin Trap Filter

  • Due to the adoption of the above technical scheme, the problem of inconvenient cleaning of the filtered resin by the existing resin trapper is effectively improved.
  • The structure design of the resin catcher for the water system is reasonable and simple. The filtered resin is collected in the collection box by setting a collection box under the filter element.
  • At the same time, the collection box can be taken out from one side of the filter cartridge to clean the filtered resin. The operation is simple and convenient to avoid the secondary filtration of the filtered resin. The filtering effect is good and the filter element is protected from blocking.

Reviews

There are no reviews yet.

Be the first to review “Resin Trap Filter For Water System”

Your email address will not be published.