Pulp Juice Residue Separator Screen

$35.90

Brand: Bluslot®
Type: Wedge Wire Screen
Material: SS304, 316, 316l, 2205,32750, 904, 904L
Filtering accuracy: 20 microns – 4000 microns
Filtering direction: FOTI & FITO
Application: Pulp Juice Residue Separator

Why Use BLU-SYG-01 Series Filter Screen?

The commonly used methods of extracting fruit juice are squeezing, and then centrifugal filtration or direct squeezing to produce the juice. The problem is that the purity of the juice is not high or the juice is not fully extracted, resulting in waste of raw materials.

The BLU-GZT-05 Series screen can completely separate the fruit pulp juice residue, improve the purity of the juice and make full use of the raw materials.

The filter element is welded by a wedge wire screen as the raw material. The lower surface of the boss on the edge of the upper part presses against the upper end surface of the sealing cover and is fitted on the port of the sealing cylinder.

A cylindrical sealant sleeve and a bushing are arranged between the outer wall of the filter frame of the filter element and the upper inner cavity wall of the sealing cylinder, and the upper end of the sealant sleeve protrudes upwards against the inner wall of the bushing.

Then, the outer wall surface of the wrapping bushing is rolled up and the bushing seat is installed on the upper-end surface of the boss of the upper part of the inner cavity of the sealing cylinder.

The inner cavity wall of the sealant sleeve tightly hugs the outer wall of the filter frame, and the sweeping brush is placed in the filter element.

Working Principle Of BLU-SYG-01 Series Filter Screen

  • When working, the processed fruit pulp is filled in the filter element.
  • Close the pressure port valve and the juice discharge pipe valve, open the decompression port, and start the vacuum pump.
  • Stir the material with the sweeping brush and clean the filter screen.
  • Always keep the material level higher than the height of the filter screen part of the filter element.
  • Take out the filter element and clean the inner cavity of the filter element with a cleaning brush. To improve the filtering effect.
  • Take out the filter element and clean the inner cavity of the filter element with a cleaning brush. To improve the filtering effect.
  • The filter element can be removed for slag removal and cleaning according to the above steps.

The BLU-SYG-01 Series screen has a simple structure, is lightweight, easy production and operation, good separation effect, high filtration speed, pure juice obtained with high juice yield, and low production cost.

Reviews

There are no reviews yet.

Be the first to review “Pulp Juice Residue Separator Screen”

Your email address will not be published.