The water tank is one of the important parts of the electric boiler system. Whether the design of a hot water storage tank is reasonable directly affects whether the operation of the whole system can meet the actual requirements.
Introduction Of Header Lateral System Of Heat Storage Tank.
A method to solve the dead angle (horizontal temperature gradient) of water temperature stratification (vertical temperature gradient).
The water temperature uniformity of large water tanks is the most important factor in whether the energy storage capacity of the water tank can meet the design requirements. It is very important for the library to solve the problems of water temperature stratification and dead angle.
We use the boiler heating water to guide the water into the wedge wire header lateral screen pipe (primary water inlet), the water inlet uniform distribution pipe is set at the bottom of the water tank, and the water outlet is evenly discharged. The water outlet is led out through the water collection uniform distribution pipe (primary water outlet) and enters the boiler for continuous heating.
The water collecting uniform header lateral screen pipe is set at the upper part of the water tank, the centerline is 100mm below the lowest water level (water level at 45 ℃), and collects water uniformly. The natural convection of hot water is used to ensure the uniform water temperature in the water tank without stratification and dead angle. The inlet and outlet of the water tank heating process (secondary circuit) are the same as the inlet and outlet of heat storage. The same group of uniform distribution pipes is used. During the heating cycle of the system, Make the hot water in the water tank from temperature stratification and improve the heating water temperature.